ESWP: International Bridge Conference®: Exhibitors
2010 List of Exhibitors
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
|
BOOTH #922 Contact: Kenneth Stockert A.D. Marble & Company is an employee owned consulting firm specializing in environmental studies, cultural resources studies, and engineering services. Our studies include NEPA documentation, wetland delineation and mitigation, air & noise, social environment, hazardous waste, geospatial data, historic structures, archaeology, public involvement, and transportation, structural, and water resources engineering. |
Acrow
Corporation of America
|
|
BOOTH #814 Contact: Antonio Marinucci, PhD, PE The ADSC-IAFD is a non-profit, international, professional, trade association representing the drilled shaft, anchored earth retention, micropile, and other related civil construction/design industries. Its members include specialty subcontractors, manufacturers and suppliers, and design engineers in the private and public sectors, and academicians. Through its 19 technical committees the ADSC establishes standards and specifications, funds research and scholarships, conducts design, construction, inspection and testing seminars, and offers field and management training programs. The ADSC-IAFD provides project review services to government agencies and owners at all levels, conducts technical conferences and industry trade shows, and publishes and distributes technical materials including its flagship periodical, FOUNDATION DRILLING Magazine. The ADSC is served by a national staff and eight regional chapters. |
Advanced Infrastructure Technologies AIT is revolutionizing bridge construction through advancements in technology. The Company’s innovative composite-based superstructure components facilitate a longer-lasting, cost-effective and eco-friendly alternative to traditional steel and concrete designs. The Company’s technology has won numerous awards and was recently featured in The New York Times and Popular Science. |
|
BOOTH #503 Contact: Benoit Kroely Advitam is a leading provider of solution and services for infrastructure management. We provide inspection software and asset management systems for bridges and other highway structures. Advitam is also an expert in structural health monitoring, our Eversense system provide long/short-term solutions for both signature structures and regular highway bridges. |
AECOM
|
|
BOOTH #834 Contact: Shanila Aslam AI Engineers is a full service engineering firm specializing in NBIS Bridge Inspection, Bridge Design, and Bridge Management Systems. Other areas of expertise include civil, sustainable design and construction, M/E/P, construction management, construction inspection, utilities/power, design-build and survey. Headquartered in Connecticut with several regional offices, the firm continues to grow dynamically as the result of a strong client focus. |
American Association of State Highway & Transportation Officials (AASHTO) BOOTH # 914 Contact: Angelique Williams AASHTO – The Voice of Transportation |
American
Bridge Manufacturing
|
American
Composites Manufacturers Association
|
American Road and Transportation Builders Association BOOTH #307 Contact: Jim Colleton We are a federation whose primary goal is to aggressively grow and protect transportation infrastructure investment to meet the public and business demand for safe and efficient travel. In support of this mission, ARTBA also provides programs and services designed to give its 5,000+ public and private sector members a global competitive edge. |
American Shotcrete Association BOOTH #607 Contact: Chris Darnell ASA is a non-profit organization of contractors, suppliers, manufacturers, designers, engineers, owners, and others with a common interest in promoting and educating the concrete industry on the versatility, quality and economic advantages of the use of shotcrete. |
|
BOOTH #402 Contact: Tracy Bedingfield Specializing in statnamic axial and lateral load testing, crosshole sonic logging (CSL), sonic integrity testing, video shaft inspection device, post grouted shafts, shaft inspection, dynamic pile testing, conventional load tests, embedded data collectors. |
|
BOOTH #807 Contact: Tom Weinmann Applied Geomechanics specializes in providing integrated monitoring
solutions associated with existing infrastructure, as well as new
construction. From tiltmeters to GPS and Fiber Optics, our innovative
and comprehensive instrumentation monitoring programs are cost effective
tools to reduce both the risk and the cost of construction. |
|
BOOTH #429 Contact: Richard Barnes |
ATLSS Research Center - Lehigh University Booth #635 Contact: Chad Kusko The Center for Advanced Technology for Large Structural Systems (ATLSS) was established in 1986, and is Lehigh's internationally respected center for engineering research and education addressing the civil and marine infrastructure for Pennsylvania and the nation. This mission includes Pennsylvania's bridge and highway structures, and the contributions of research, education and technology transfer to enhancing their design and performance. ATLSS has extensive experience in laboratory and field instrumentation, testing, and fatigue and strength evaluation of bridges. |
|
BOOTH #409 Contact: Lorella Angelini BASF Construction Chemicals - Building Systems, manufacturer high quality traffic deck membranes, repair mortars, specialty grouts, and concrete strengthening products for bridge construction, repair, maintenance and rehabilitation. Our products are often combined to form integrated, single-source systems to solve the most challenging bridge restoration projects. |
|
BOOTH # 538 Contact: Anne Delvaux Beaufort Analysis, Inc. (BAI) is the distributor of the Strand7® Finite Element Analysis System in the United States. Strand7 is a general purpose finite element analysis program developed by Strand7 Pty Ltd, Sydney,Australia and is used throughout the world for the analysis of ship structures, aircraft, road and rail vehicles and a wide range of industrial products as well as for the analysis of buildings and bridges. |
BendTec,
Inc.
|
|
BOOTH #539 Contact:Barbara Day Bentley Systems, Incorporated provides software for the lifecycle of the world's infrastructure. Bentley delivers Bridge Information Modeling (BrIM) technology for the entire bridge lifecycle. Bentley BrIM provides broad access to advanced bridge products in Bentley's comprehensive software portfolio. Bentley products provide an interoperable, data-managed bridge solution for planning, design, engineering, analysis, fabrication, construction, maintenance, and rehabilitation. These end-to-end solutions enable the transportation industry to efficiently and effectively address the challenges of new and aging bridges and deliver sustainable, long lasting infrastructure. |
|
BOOTH #837 Beth's Barricades assembles and distributes a full line of traffic control products. Our 5,000 square foot sign shop produces and carries a full line of PennDot approved signs. With over 10,000 square feet of warehouse space and nearly 10 acres of storage, we are able to stock traffic calming devices, school zone safety products, radar equipment, mobile message boards, solar arrow boards and more. |
Bridge design & engineering magazine BOOTH # 806 Contact: Lisa Bentley |
Bridge Grid Flooring Manufacturers Association BOOTH # 422 Contact: Mark Kaczinski |
Bridon
International
|
Bureau
Veritas
|
|
BOOTH #836 Contact: Joseph Booth Through dedicated in-house functions, Spencer combines innovation and value engineering to deliver refurbishment and upgrade works, including our specialist experience of bridge access gantries. We are world leaders in suspension bridge main cable inspection and dehumidification technologies and have delivered these works on all of the UK’s major suspension bridges. |
Campbell
Scientific, Inc.
|
Carolina
Stalite Company
|
|
BOOTH # 443 Contact: Jeff Culver CCI Systems is the nation’s premier end-to-end solutions provider of communication network services. From humble roots in Iron Mountain, MI, CCI pulls from more than 50 years of industry experience to deliver flexible, custom solutions that work today and meet the need of tomorrow. For more information, visit www.ccisystems.com. |
Central Atlantic Bridge Associates BOOTH #715 Contact: Heinrich O. Bonstedt The Central Atlantic Bridge Associates (CABA) represents PCI Certified prestressed concrete bridge beam producers in the Central Atlantic region – Pennsylvania, Virginia, Maryland, Delaware, and New Jersey. It promotes the use, application, and technical development of prestressed concrete for the transportation markets. |
Chase
Construction Products
|
ChemCo
Systems
|
Cleveland Electric Labs and Chandler Monitoring Systems Booth #: 636 Contact: Jim Zammataro CEL & CMS provide complete design and installation of structural health monitoring systems using the superior technology of fiber optics. |
Clodfelter
Bridge & Structures Int'l, Inc. (CBSI)
|
|
BOOTH #301 Contact: Joe Rose Coastal Precast Systems, a PCI Certified Producer, located right on the Elizabeth River in Chesapeake, VA and services markets all along the eastern seaboard. CPS manufactures a full range of pre-cast/pre-stressed, structural concrete products and noise wall products for port facilities, marine and highway structures. We invite you to visit us on our website at www.cpsprecast.com. |
Computers
& Structures, Inc.
|
CONTECH
Construction Products Inc.
|
Corrpro
Companies, Inc.
|
CTLGroup
|
The
D.S. Brown Company
|
D'Appolonia
Engineering
|
|
BOOTH # 602 Contact: Tom Nicholson Dayton Superior provides concrete accessories for all your needs including Aztec composites and plastic rebar chairs, Bar Lock® mechanical couplers for rebar splices, The Taper-Lock® System of tapered thread for rebar splicing, a full line of pre-cast products, and construction chemicals . Visit us at www.daytonsuperior.com. |
|
BOOTH #831 Contact: Fred Grant We are your resource for industrial service solutions for federal, state and local governments, DOT's, railroads and industries throughout North America. Our Cleaning Management services include bridge cleaning, street sweeping, graffiti removal, tunnel washing and high-pressure cleaning. We also provide total Asset Management for contracts which include multiple maintenance services. |
|
BOOTH #815 Contact: Mary Ellen Bruce One of the strengths of DFI is the broad spectrum of its membership. All disciplines participate on an equal footing, be they contractors, engineers, owners, academicians, equipment manufacturers and distributors or materials manufacturers and suppliers. All types of foundation systems are represented, whether installed by driving, drilling or other means. This diversity provides a wealth of knowledge and an opportunity to learn from one another. |
|
BOOTH #634 Contact: Mike Delli Manufacturer and Distributor of the FlexAble Bridge Joint System, mastic deck repair products in black or gray, waterproofing membranes and crack and joint sealants. |
|
BOOTH #829 Contact: Tung Ng Dynamic Isolation Systems Inc. (DIS) has been at the forefront of seismic isolation for over 25 years. DIS designs, manufactures and tests seismic isolation bearings of all sizes and specializes in custom designs. We have supplied isolators for the majority of prominent isolation projects around the world. Please contact DIS for design assistance for your isolation project. |
Dynamic
Surface Applications
|
DYWIDAG Systems International USA, Inc. Booth #1012 Contact: Joe Salvadori Internationally leading manufacturer/supplier of specialized construction materials and equipment: Post-Tensioning, Reinforcing, Stay-Cables, Geotechnical, and Formwork Accessories. DSI offers the following services: heavy lifting, NDT, structural repair/strengthening, value-engineering and post-tensioning installation. Our mission: provide the highest degree of technical support/customer service and superior engineered systems. Local Presence-Global Competence. Rely on DSI. |
|
BOOTH # 825 Contact: Eric Johansen E.T. Techtonics, Inc., located in Philadelphia, PA, specializes in the design and construction of lightweight maintenance-free fiberglass pedestrian bridges. Started in 1987, the company was in the research and development phase from 1987-1993 to develop the bridge system. To date it has sold over 500 fiberglass bridges worldwide. |
|
BOOTH #408 Contact: Brian Curry EarthCam is the leader in webcam technology for infrastructure construction professionals and government agencies since 1996. Serving 28 departments of transportation, including US and Canadian authorities, EarthCam delivers network camera solutions using solar and wireless technology to provide live construction and work zone views, public information and time-lapse documentation. |
Earthquake Protection Systems, Inc. BOOTH #823 Contact:Roy Imbsen Earthquake Protection Systems is the world's leading manufacturer of seismic isolation bearings. Our Friction Pendulum bearings are used in the world's largest and most critical seismic isolation applications. The new Triple Pendulum bearing provides the best seismic performance available in seismic isolation at a lower installed cost. |
Eco Sound Barrier, A Centria Company BOOTH #323 Contact: Todd Padezanin Eco Sound Barrier, a revolutionary highway sound barrier made of durable steel skins and a lightweight composite core, can be fabricated and installed as an effective sound barrier at significant cost savings compared to traditional precast options. The panels can be customized for any project and contribute to sustainable building requirements. |
|
BOOTH #930 Contact: Bernie Zimmovan Erdman Anthony has provided bridge engineering for more than 50 years to major transportation agencies throughout the eastern United States. We offer a full range of services, including structural design, highway design, H&H design, and railroad coordination. Overall, our core businesses include transportation, civil, facilities, geospatial, and construction services. |
Eriksson
Technologies, Inc.
|
|
BOOTH #805 Contact: John Weisbarth The Euclid Chemical Company is a leading manufacturer of polymer bridge deck overlay systems, epoxy adhesives and coatings, concrete and masonry ad mixtures, curving and sealing compounds, cementitious and epoxy grouts, joint fillers and sealants, as well as a complete line of concrete repair and restoration materials. These products are available world wide. |
Evonik /Cyro Industries
|
FIGG Contact: Linda Figg FIGG specializes in bridge design and construction engineering and management. Celebrating over 30 years of Creating Bridges as Art® for our customers with more than 300 awards for innovation, economy and aesthetics. Our focus on bridges allows us to create landmarks that incorporate function, sustainable design and beauty to enhance the quality of life for communities across America. |
|
BOOTH #505 Contact: Andrew Micklus Freyssinet offers value added products and services to the civil engineering industry including: Multi-Strand and Thread Bar Post-tensioning Systems, Stay Cable Systems, Suspension Bridge Cables and Hangers, Expansion Joints, Bearings, Structural Dampers & Seismic Devices, Structural Repair/Strengthening, Barrier Cables, Monitoring Systems & Services, Heavy Lifting / Moving |
|
BOOTH #436 Contact: Sherry Roberts Wagman was founded in 1902 and continues on today as a fourth generation, private family-owned general contracting business headquartered in York, PA. G.A. & F.C. Wagman, Inc. operates as a heavy civil contractor specializing in transportation infrastructure. Wagman’s core competencies include: design-build, bridges, structures, highways, excavation, drainage, modified concrete and foundations. |
|
BOOTH #916 Contact: Gene Mitchell G.W.Y., Inc. is North America’s largest supplier of both Tone and Makita structural bolt installation tools. G.W.Y. has a full line of electric wrenches and hand wrenches for all installation methods (Calibrated Wrench, DTI, TC Bolts & Turn of Nut.) G.W.Y. sells, rents, services and carries an extensive inventory of tools and parts. G.W.Y's consulting staff is known for its ability to solve bolting problems both inhouse and at the job site. |
|
BOOTH #737 Contact: Chris Brun Geokon Incorporated, manufactures high quality geotechnical instrumentation suitable for monitoring the safety and stability of bridges, dams, tunnels, foundations, etc. and various ground water monitoring applications. Instrumentation includes Vibrating Wire piezometers, inclinometers, tiltmeters, extensometers, embedment jointmeters, load cells, pressure cells, strain gages, temperature sensors and data loggers. |
|
BOOTH #414 Contact: Eric Hilberath GeoStructures, Inc. is a design-build contractor who provides customers with the most economical solutions to their engineered earth structure, retaining wall, or foundation support problems. We draw from a wide variety of products and construction methods for Highway, Industrial, and Commercial Development projects. |
Greenman-Pedersen, Inc. / SG Pinney Instrument Sales, Inc.BOOTH #603 Contact: Denise Badini Greenman-Pedersen, Inc. is a top national engineering/architectural design and construction firm involved on major projects throughout the U.S. and overseas since 1966. Provides many multi-discipline services to various industries. Instrument Sales, Inc. a GPI Company specializes in corrosion instruments and other equipment plus safety equipment. Underwater Engineering Services a GPI Company specializes in power plant maintenance and marine construction. Acquired in. 2006 CCC&L a (new) GPI Company specializes in expert witness testimony, coating conditions survey, including a full service laboratory. |
|
BOOTH #935 Contact: Scott Donley Hall Industries, Inc. is your “bridge product problem solver.” Please inquire for your Railings, Down Spout, Scuppers, Sign Structures, HLMR Bearings, and other fabricated or machined bridge construction needs. Hall provides Engineering, Drafting, Machining, and Fabrication services at our two AISC certified shops located in Ellwood City, PA. |
Harcon CorporationBOOTH #543Contact: Harry Stoltzfus Harcon Corporation provides Bucket Boats, Bridge Trackers and rigging services on bridge inspection and repair projects. Since 1988, we’ve eliminated the need for lane closures and track time on thousands of structures nationwide. |
Hardesty & Hanover, LLPBOOTH #735Contact: Hank C. Pokigo Hardesty & Hanover, a world renowned bridge engineering firm, boasts 120 years of experience in engineering enduring structures. From conceptual design through construction inspection, Hardesty & Hanover projects include major bridges, highways, expressways, and heavy movable structures. We offer clients great customer service and projects that end on-time and under budget. |
|
BOOTH #822 Contact: Greg Simmons Hayward Baker Inc. is the leading geotechnical construction contractor in North America, providing the complete range of ground improvement services. As a member of the worldwide group of Keller companies, Hayward Baker Inc. is committed to providing the most economical and technically correct geotechnical solutions for planned and existing bridges. Ranked #1 Specialty Foundation Contractor by Engineering News-Record, year after year. |
|
BOOTH #736 Contact: Michael Zicko The Hybrid-Composite Beam (HCB) is a revolutionary, sustainable technology combining the strength and stiffness of concrete and steel with the lightweight and corrosion resistant advantages of fiber reinforced polymers (FRP). Safety and durability are inherently built into all HCBs. The strength capacity consistently exceeds code requirements and the corrosion mitigating properties provided by the FRP's create a structure that lasts longer with less maintenance. |
|
BOOTH #439 Contact: Steven Bussanmas High Steel Structures has been delivering quality to its customers for over 75 years. Founded in 1931, High Steel is one of the largest fabricators of bridge structural steel in the United States, with more than one million tons of bridge steel fabricated over the past 20 years. |
|
BOOTH # 536 Contact: Gary Lallo Manufacturer of permanent and portable steel barriers |
Hilman RollersBOOTH #716Contact: Jeff Hill Hilman Rollers are an essential component for bridge construction projects. Whether used in the casting yard, built into segment launching equipment, moving entire bridge spans, or placing large castings - whatever the heavy load moving task - Hilman Rollers are the right tool to get the job done quickly, efficiently, and safely. |
Houston StructuresBOOTH #725Contact: Mike Ulven Houston Structures Incorporated is a supplier of specialty forged,
cast, machined and fabricated structural support products for the
infrastructure industry. Located in Oregon, Houston Structures products
supplied include open and closed wire rope and strand sockets, wire
rope and strand assemblies, open and closed bridge sockets, anchor
sockets, turnbuckles, and specialized cable castings and forgings. |
HRV Conformance Verification Associates, Inc. BOOTH #902 Contact: Jackee Ging HRV provides a comprehensive range of services worldwide in materials and construction inspection, including steel, concrete, coatings, mechanical, and electrical. Serving the public and private sector, HRV is a leader in quality assurance, engineering consulting and expediting for the bridge/highway, water/wastewater, power, pressure vessel and commercial construction markets. |
|
BOOTH #812 Contact: Edward Liberati Hydro-Technologies, Inc. is the most experienced hydrodemolition
company in North America. Our expertise is the selective removal
of reinforced concrete using computer-controlled "high pressure
water jet" robots. Our company specializes in the rehabilitation
of the following type's reinforced concrete structures: Bridges,
Parking garages, Tunnels, Plants, Dams. We understand what is important
to the Owners and Contractors. Bridge deck preservation is necessary
to keep our nation's roadway system in service. We have developed
the Fast Track Hydro-Demolition Bridge Deck Overlay Method(tm) which
is used by many Highway Departments and Contractor's as the fastest
and most economical construction method to repair and preserve bridge
decks. The service life of bridge decks are extended by 25 years
when this method is used with minimum disruption to traffic. |
|
BOOTH #315 & 317 Contact: Mark Henderson Innovative Green Solutions (IGS) markets several key infrastructure products, including bridges, railroad ties, retaining walls, marine pilings, and bulkheads, all made from a unique, patented, non-toxic recycled plastic composite. These composites are as strong as steel, won’t rust or corrode, won’t leech harmful chemicals and are impervious to infestation. Our solutions, when properly designed, cost less and last longer than traditional wood, steel or concrete alternatives. |
InspectTech Systems, Inc.BOOTH #712Contact: Jeremy Shaffer, PhD InspectTech provides easy to use software solutions that streamline the inspection process from onsite to back-office. The BridgeInspectT software suite can be quickly customized for each client and offers significant time-savings to inspectors and managers. The bridge inventory and management software includes cost estimates, GIS interface, full searching, custom reports, maintenance, and scheduling modules. The standalone inspection software significantly enhances the inspection process through customized forms with pick lists, coding manuals, and digital picture integration. InspectTech works with governments, private owners, and engineering consulting companies to meet their specific software needs. |
|
BOOTH #400 Contact: Nico Sutmoller Insulfoam, a Carlisle Company, manufactures InsulFoam GF – Geofoam, a high performance lightweight geosynthetic fill material consisting of closed cell expanded polystyrene from 9 manufacturing facilities throughout the United States. Insulfoam is the largest block molded eps manufacturer in North America. Visit www.insulfoam.com for literature, specs, samples and technical information. |
|
BOOTH # 714 Contact: Joe Romine IVS Hydro Demolition Services is a division of IVS Hydro, Inc. We travel the entire United States performing all types of concrete removal using hydro demolition. We also have a fleet of vacuum trucks and offer debris cleanup as a service in conjunction with our removal of concrete. We have removed millions of square feet of various concrete surfaces with hydro demolition. |
|
BOOTH #313 Contact: Tracy Black Kenco furnishes attachments for excavators ranging from mini to 200,000 pounds, wheel loaders from 1,0 to 40 yards, dozers, backhoes, and skid steer machines. See our unique lifting attachments for moving barrier wall, concrete, pipe and more. |
|
BOOTH #926 Contact: Richard J Taylor North American manufacturer distributor of Klaas Coatings Si-Rex03™ Silicone Resin Emulsion Paint (SREP) for concrete and masonry. Water repellent, breathable architectural coating - using UV resistant inorganic pigments for non-fading colors - eliminates flaking and peeling with excellent durability and resistance to weathering and chalking to significantly outlast and outperform conventional paints. Primers: Si-Prime™ silane/siloxane/acrylic blend and Cremsil™ 80% active octylsilane based thixotropic cream that penetrate and seal the substrate. |
KOREA : 2011 IBC Featured Country Contact: Hyun-Moo Koh |
KTA-Tator, Inc.BOOTH #738 Contact: Scott Rice KTA-Tator, Inc. (KTA) is a consulting engineering firm founded in 1949. KTA provides coating consulting and construction inspection services, steel fabrication inspection services, laboratory testing and coating failure analysis, and distributes inspection and monitoring equipment. An independent and unbiased philosophy has permitted KTA to provide expert professional services to its clients for over 60 years. |
|
BOOTH #637 Contact: Merritt Hanson Kwik Bond Polymers is a manufacturer and distributor of bridge rehabilitation materials, specializing in polymer based products for long life-cycle and rapid return to service. |
|
Booth #415 Contact: Pat Kane L.R. Kimball, headquartered in Ebensburg, Pennsylvania, is a full-service architectural and engineering firm serving a prestigious list of clients throughout the United States. We deliver professional services to the commercial, industrial, governmental, and private marketplaces through a network of 15 offices. L.R. Kimball Service areas include Architecture, Engineering, and Communications Technology. |
LARSA Inc.BOOTH #524 Contact: Ali Karakaplan LARSA 4D analysis and design software from New York based LARSA, Inc. addresses the specialized needs of segmental, cable, curved and other types of bridge structures. Staged construction with 3D nonlinearity and "4D" time effects provide a solid basis for advanced projects. The LARSA 4D Section Composer creates a platform for nonprismatic sections and composite construction. Notable recent additions to LARSA 4D are the AASHTO LRFD steel plate-girder code check module with influence surface based live load analysis, super-cable element and cable-stay bridge iterative geometry optimization. A dedication to providing unbeatable support services makes LARSA 4D a standard in leading U.S. firms for bridge design and construction analysis, continually pioneering engineering technology by working closely with its clients on a variety of projects. |
|
BOOTH #928 Contact: Jeffrey J. Bean Layne GeoConstruction, a division of Layne Christensen Company, is a specialty geotechnical construction company, offering a wide array of service capabilities. A commitment to solution-driven innovation positions Layne GeoConstruction as a leader in jet grouting, drilled micropiles, limited mobility grouting, permeation grouting, tie-back anchors, vibratory ground improvement and stone columns. Real time monitoring can be utilized in the providing of many of these services. |
Loadtest, Inc.BOOTH #515 Contact: John Hayes Loadtest, Inc. specializes in deep foundation testing using the award winning Osterberg Cell method. Loadtest offers Osterberg cell testing equipment, installation services as well as full planning & specification support, field load testing and analytical services. |
|
BOOTH #934 Contact: Jim Polster We manufacture and market an amazing telescoping camera mount and triggering system that securely positions and operates any compact digital camera at previously unimaginable heights, lengths, and depths! When inspecting, diagnosing, estimating, selling or documenting just about anything, this exciting new tool takes your camera just about anywhere! |
LUSASBOOTH #708 Contact: Terry Cakebread Use LUSAS Bridge software for all your frequency, seismic, dynamic, nonlinear, buckling and fatigue analysis. Staged construction, creep modeling, prestress / post-tensioning and curved girder analysis is supported. A vehicle load optunisation facility simplifies worst-case loading patterns. AASHTO and other design codes supported. Extensive results processing facilities are provided. |
|
BOOTH # 835 Contact: Matthew Wolf Mala Geoscience USA, Inc. is a leading manufacturer of innovative ground penetrating radar (GPR) systems and software. Our innovative and extremely versatile ProEx system offers a flexible multi-channel solution for high frequency bridge deck investigation. This platform can also be utilized for evaluating pavement thicknesses, railway ballast and geotechnical investigations. |
|
BOOTH #915 Contact: Mitch Caya Mandli Communications is an industry leader in the design and development of highly specialized data collection systems and services for various organizations throughout the world. Mandli began collecting bridge clearance data in 2001, and has recently been using their new LIDAR-based mobile data collection system for clearance measurement collection.
|
Maryland State Highway Administration BOOTH # FEATURED AGENCY Contact: Robert J. Healy |
|
BOOTH #639 Contact: Tom Caskey AISC Structural Steel Bridge & Building Fabricator |
McClain & Co., Inc.BOOTH #709Contact: Valerie Ellington Underbridge Access Equipment Rentals, Truck Mounted Aerial Platforms & Certified Traffic Control. Over 35 units including A-75’s, UB-60’s, Mark IV Snoopers, UB-50’s, Bridgemasters, variety of 40’ Platform & Bucket Snoopers, UB-30 rail-mounting unit, small & large Moog Platforms ranging 24’ - 70’. Hi-Reach & Bucket Trucks 27-120’. Certified Operators, innovative audio/visual system for added safety, ANSI certified units. |
MDX SoftwareBOOTH #717 Contact: Chris Douty Developer of curved and straight steel bridge design and rating
software for AASHTO ASD, LFD, and LRFD. |
Michael Baker Jr., Inc.BOOTH #912 Contact: Jeffrey J. Campbell Bridges are complex components of our transportation infrastructure. The planning, design, construction and maintenance of these integral structures require experience, innovative approaches, and reliable project delivery--all aspects of Baker's value-based bridge services. Baker--Creating value by delivering innovative and sustainable solutions for infrastructure and the environment. |
|
BOOTH #: 723 Contact: Sang Shim |
|
BOOTH #606 Contact: Terry Tamutus MISTRAS products & Systems Division develops and manufacturers leading edge technologies and products for nondestructive testing and predictive maintenance. Since 1972 we have been a leader in providing inspection solutions to assure structural integrity of bridges, parking garages, dams and structures worldwide. We also offer Structural Health Monitoring (SHM), a digital solution which tracks internal corrosion for bridges and other architecture. |
Monotube Pile CorporationBOOTH #706 Contact: Scott Udelhoven End-driven longitudinally fluted steel shell for friction bearing applications available in a variety of diameters and tapers with engineering support for your project needs. |
|
BOOTH #331 Contact: Christine Moog Since 1980 Moog has been supplying their customers with state of the art mobile under-bridge inspection/maintenance equipment. Superior quality, innovative design, plus fulfilling our customer's requirements have been the driving force of Moog's success. Moog supplies units with reaches ranging from 15 ft. to 70 ft. and load capacities from 660 lbs. to 2,200 lbs. |
|
BOOTH #412 Contact: Lauren Mireles National Instruments measurement systems deliver performance, reliability, and versatility for engineers developing and deploying structural health monitoring (SHM) solutions. NI platforms combine modular, rugged instrumentation with LabVIEW software for economical solutions designed for harsh operating conditions, unattended operation, and remote operation for extended periods of time. Learn more at ni.com/shm. |
National Steel Bridge AllianceBOOTH #729Contact: Brian Raff The National Steel Bridge Alliance is organized and dedicated to better serve our customers and members with state-of-the-art design and construction of steel bridges. We are a unified industry organization of businesses and agencies interested in the development, promotion and construction of cost effective steel bridges. |
The National Work Zone Safety Information Clearinghouse BOOTH #309 Contact: Jim Colleton The National Work Zone Safety Information Clearinghouse is dedicated to providing the transportation construction industry and the general public with comprehensive information to improve motorist, worker and pedestrian safety in roadway work zones. |
|
BOOTH #430 Contact: John Dallain The Neel Company provides complete engineering support to owners, consultants and contractors for the T-Wall Retaining Wall System. The DOT approved design, comprising of units with a monolithic precast reinforced concrete face and perpendicular stem, is backfilled with a select fill and no additional soil reinforcements. Also available to meet railroad loading. Contact The Neel Company directly for pricing or design assistance. |
Nicholson Construction Company BOOTH #507 Contact: Fred Tarquinio Nicholson is a geotechnical contractor specializing in deep foundations, earth retention, ground treatment, and ground improvement. We work in a wide range of environments, from power plants and dams, to bridges and skyscrapers. Headquartered in Pittsburgh, PA, Nicholson has eight offices around the country. |
Non-Destructive Testing ServicesBOOTH #707 Contact: Mike Forbes Non Destructive Testing Services provides bridge fabrication inspections for steel and concrete prestressed bridges, NDT inspections on existing bridges, and bridge paint inspections. NDTS has developed and performs a complete sign structure inspection program. NDTS's mechanical laboratory provides weld procedure qualifications, bridge bearing pad testing, and numerous other testing services. |
North American Galvanizing Co. BOOTH #424 Contact: Mike Stroia The Company’s galvanizing and coating operations are composed of eleven facilities located in Denver Colorado, Louisville Kentucky, Missouri (Kansas City and St. Louis), Canton Ohio, Tulsa Oklahoma (2), Nashville Tennessee, Texas (Houston and Dallas Ft. Worth), and Wheeling West Virginia. |
|
BOOTH # 938 Contact: Larry Olson Olson Engineering specializes in nondestructive evaluation (NDE) , infrastructure condition assessment and repair, structural health monitoring, geophysical and vibration engineering. Olson Instruments manufactures ultrasonic, sonic and seismic instruments for pavements, foundations and structures as well as seismic surface wave, crosshole, downhole, reflection and refraction tests, and distributes IDS radar systems in the US. |
|
BOOTH #638 Contact: Robin Stanton Olympus provides an industry leading portfolio of ultrasonic testing, phased array, eddy current, remote visual inspection, High speed video and related support technologies. These technologies can be used to survey the quality and integrity of construction welds such as those in pipelines and bridges, as well as sheet metal spot welds and certain other weld geometries found in manufacturing. |
|
BOOTH #643 Contact: John F. Graham, Jr., PE OSMOS USA is a Structural Health Monitoring Company for bridges, buildings, dams, towers, Railroads, etc. We provide continuous readings on your monitor using a web-base system at the site. We also provide warning and then alarms so that observation need only be done when an event takes place. We have completed over 1300 monitoring projects throughout the world. |
Palmer
Engineering
|
|
BOOTH #828 Contact: John Scott Tihansky FIBERGLASS PILINGS. PEARSON FIBERGLASS COMPOSITE PILINGS are today’s preferred building material for waterfront foundations, docks, piers and bridges. Our composite pilings are stronger than wood, steel or concrete pilings, and because they will not rust, rot or crumble, they will last virtually forever. Containing no chemical preservatives that leach into the water, our fiberglass composite pilings are environmentally friendly and are the choice of “green” developers of clean marinas and waterfront properties. |
Pennoni Associates Inc.BOOTH #713Contact: Jennifer Laning, PE Pennoni Associates is a multi-disciplined consulting engineering
firm with 20 offices throughout the eastern United States. Pennoni,
ranked as a best place to work in PA and NJ, offers services in
Transportation, Underwater Inspection, Civil/Municipal, Environmental,
Inspection and Testing, Surveying, Site Design and Landscape Architecture,
MEP, Geotechnical and Structural Engineering. |
Phoenix National Laboratories, Inc. BOOTH #839 Contact: Alexander Zuran, III |
Pickering, Corts & Summerson, Inc. BOOTH #542 Contact: John C. Wilhelm, PE One of the region's leading engineering firms, Pickering Corts & Summerson, Inc. provides comprehensive engineering services from our headquarters in Newtown, PA, and two regional offices in West Trenton, NJ and Plymouth Meeting, PA. Thriving on a 91-year tradition of excellence, PCS maintains award-winning practices in Civil Engineering, Municipal Engineering, Landscape Architecture, Transportation Design, Land Surveying, Bridge Inspection, and Underwater Bridge Inspection. A recognized leader in bridge design and inspection, PCS has inspected thousands of bridges in New Jersey and Pennsylvania, including many of the largest, most complex structures in the region. PCS underwater inspection teams include professional, commercially-certified, divers and employ cutting-edge underwater imaging equipment. |
|
BOOTH #830 Contact: Stan Agee Pieresearch manufacturers concrete pier accessories, Centraligner pier sleds, Hijacker pier bolsters, Snapaligner pier wheels, and Bar Boosters, whose sole purpose is to keep a reinforcing steel cage centered and off of the floor of the drilled shaft. |
|
BOOTH #609 Contact: Dan Patacca POLY-CARB, a division of Dow Formulated Systems, is a 37-year leader in premium polymer overlay solutions that prevent the deterioration of bridge decks and offer increased safety through skid resistance. Their Asset Preservation turn-key performance-based system is transforming infrastructure protection with long-term accountability, which maximizes infrastructure service life and avoids costly repairs. |
Power
Team, An SPX Brand
|
Proto
Manufacturing, Inc.
|
|
BOOTH #535 Contact: Neil Brown Antirock has been protecting bridge decks world wide since 1976 with it's first installation still in place 34 years later. The bond created between the bridge deck and Antirock is unsurpassed by any waterproofing product in use today. |
|
BOOTH #826 Contact: Mo Ehsani Founded by Professor Mo Ehsani, a pioneer in the field of Fiber Reinforced Polymers (FRP), QuakeWrap offers turnkey solutions including design, materials and installation for repair and strengthening of structures. Many of QuakeWrap’s projects have been covered by national media such as History Channel and can be viewed on our website. |
R.J. Watson, Inc.BOOTH #500 Contact: Jeremy Konst R.J. Watson, Inc. specializes in the design manufacture and testing of high load multirotational bearings, seismic isolation devices, joint sealing systems, waterproofing membranes and high strength fiber composite materials used to strengthen and rehabilitate structural members such as columns, beams, walls, piles, girders and slabs. In addition, R.J. Watson is now involved in the design and supply of FRP bridge deck and girder systems. |
Rampart Hydro ServicesBOOTH #838 Contact: Jeff Parks Rampart is the world leader in ultra-high pressure (UHP) Hydrodemolition
and HydroCleaning. Ultra high pressure Hydrodemolition uses less
water; is environmentally friendly; provides a superior bond; and
is fast and cost effective. Rampart has used Hydrodemolition on
bridge surfaces and substructures, dams, tunnels, and parking garages.
Rampart now offers complete vacuum cleanup of the water and debris
creating Dry Hydrodemolition. We look forward to helping you with
your demanding projects. |
The Reinforced Earth CompanyBOOTH #501Contact: Alicia Olson The Reinforced Earth Company is a world leader in the design and supply of proprietary retaining wall system and earth-related technologies. Recognized as the supplier to some of our nation's largest highway construction projects, working as a subcontractor/material supplier on Department of Transportation and privately owned projects, we perform all duties associated with our jobs from sales, marketing, engineering, design, supply and construction assistance. |
|
BOOTH #405 Contact: Rick Schwer As the leading monthly trade publication for the transportation construction market, Roads & Bridges Magazine reaches over 60,000 engineers, contractors, DOT and other public officials (local, county, state & federal). Our readers design, build and maintain the roads, highways, bridges, and viaducts across the US and Canada. |
|
BOOTH #403 Contact: Etienne Constable Geotechnical and Structural Instrumentation – Roctest is the leading manufacturer of geotechnical and structural monitoring instruments since 1947. |
|
BOOTH #339 & 438 Contact: Jerry Dolly The QuikDeck™ Platform System can provide the solution to reduce labor costs and enhance access for bridge construction, rehabilitation and maintenance. QuikDeck™ can significantly reduce man-hours and overall project costs. Safety is our number one goal. All QuikDeck™ components are designed to meet or exceed OSHA safety regulations. |
Salit Specialty RebarBOOTH #401 Contact: Kevin R. Cornell Salit Specialty Rebar (SSR) is North America's stainless rebar specialist. At SSR we offer shipping across North America, fabricated rebar, dedicated equipment, on time delivery, cut to length, and shrink wrapped to avoid contamination. SSR offers all sizes in both metric and Imperial from our vast inventory. |
Schnabel EngineeringBOOTH #917Contact: Allen Cadden Schnabel Engineering was founded in 1956 by Jim Schnabel. Today, Schnabel Engineering, with our subsidiary Lachel & Associates, is an employee-owned company offering highly specialized services in geotechnical engineering, geostructural design, dam engineering, tunnel and underground engineering, environmental, geophysical and geosciences, construction monitoring, and resident engineering from 18 locations throughout the United States. Schnabel plays an important role serving clients in both the private and public sectors, solving problems related to the earth and the environment. |
|
BOOTH #936 Contact: Felicia Thomas Sci-Tek, one of the largest minority owned companies in the Pittsburgh region, offers a broad range of experience and deep expertise in civil, environmental, and geotechnical engineering. Private and public clients are located throughout the Mid-Atlantic and Northeastern United States. Sci-Tek provides the following solutions for the transportation industry: Hydraulic/Hydrologic Modeling and Analysis, Lighting Design, Environmental Consulting, Water Resources Engineering, and Railroad Crossing Designs and Approvals. |
Scougal Rubber Corp.BOOTH #614Contact: Rob Anderson Manufacturer of Steel Reinforced and Plain Elastomeric Bearings,
PTFE Slide Bearings, Vibration Isolators as well as Cable Dampers
and Sealing Boots. In business since 1916 Scougal Rubber has been
a supplier to the bridge industry for over 40 years. |
SDI (Shaft Drillers International) BOOTH #906 Contact: Rachel Wolfe Bridge Construction Industry leaders rely on SDI for geotechnical construction solutions - even in the most challenging ground conditions. Over 100 years of experience and utilization of our specialty equipment has uniquely positioned SDI to provide turnkey ground construction solutions. |
Seismic
Energy Products, L.P.
|
SensrBOOTH #813 Contact: Chris Kavars Measuring a structure's motion, vibration and tilt angles are critical components for assessing and maintaining the safety and viability of a structure. SENSR's unique integrated solutions reduce the costs and complexities related to structural monitoring. SENSR will be displaying their new remote monitoring stations featuring the CX1 Dynamics Monitor. CX1s are now being deployed on bridges, buildings and towers all over the world. |
Short Span Steel Bridge Alliance BOOTH #843 Contact: Dan Snyder The Short Span Steel Bridge Alliance is a group of bridge and culvert industry leaders, including manufacturers, fabricators and representatives of related associations and government organizations who have joined together to increase awareness of the unique benefits, cost-competitiveness and safety facts related to the use of short span steel bridges in installations up to 140 feet in length. |
SIKA
Corporation
|
Silica Fume AssociationBOOTH #817Contact: Tony Kojundic The Silica Fume Association, through a cooperative agreement with the FHWA, provides high-performance concrete technology transfer to transportation departments and the design community. |
|
BOOTH #804 Contact: Michael Plishka SIMULIA is the Dassault Systèmes brand that delivers an extensive portfolio of Realistic Simulation solutions including the Abaqus product suite. By building on established technology, respected quality, and superior customer service, SIMULIA makes realistic simulation an integral business practice that improves product performance, reduces physical prototypes, and drives innovation. |
|
BOOTH # 942 Contact: Todd Kearns Skala specializes in bridge inspection and maintenance using rope access throughout North America. Rope access capabilities allow Skala's FHWA-certified bridge inspectors to work on structures otherwise inaccessible or too expensive to reach using other means. |
|
BOOTH #431 Contact: Steve Yassem A premier steel foundation supplier serving the US, Canada, Mexico, Central America, Caribbean and South American markets, Skyline Steel is a wholly-owned subsidiary of ArcelorMittal, the world’s largest and most respected steel company. ArcelorMittal’s backing complements and synergizes Skyline Steel’s internal strengths and empowers it to service its customers and the industry. |
Sofis Company, Inc.BOOTH #526 Contact: William J. Sofis, Jr. Sofis Company, Inc. has been a General Contractor for 50 years. We are DOT prequalified. We have earned a reputation for knowledge and respectability specializing in Bridge Repair, Inspection and Support Services. Supplying top of the line Snoopers, Cable Rigging, Traffic Control and all related services; with an exemplary safety record. |
Sound Fighter Systems, LLCBOOTH #742Contact: Matt Harding Sound Fighter® Systems (SFS) has been designing, engineering and manufacturing highly-effective absorptive sound walls since 1973 making us the oldest established manufacturer of absorptive noise barrier wall systems in America. Our LSE Wall System has been the go-to noise abatement tool of DOT’s, Acoustic Engineers & Consultants, Developers, Architects, Oil & Gas Companies and Contractors around the world in countless different applications. |
|
BOOTH #537 Contact: Scott Fowler Serving the Companies that have been building America Since 1969.SSI offers Contractors and Owners innovative products for new and remedial construction. In today’s competitive market-place we hope to bring more than a take an order mentality. SSI currently serves the construction in two primary areas: Commercial Construction and Highway Construction. SSI has 6 office/warehouse locations and one sales office only location. |
|
BOOTH #824 Contact: Ned Bardic Stagnito Media, the nation’s leading resource for civil and structural engineers, publishes CE NEWS, STRUCTURAL ENGINEERING & DESIGN, SUSTAINABLE ENGINEERING, and REBUILDING AMERICA’S INFRASTRUCTURE magazines, and encompasses an integrated media platform including events, electronic media and custom media. |
Stirling Lloyd Products, Inc.BOOTH #908Contact: Simon Greensted 'Eliminator' is the world's most widely-specified sprayed bridge deck waterproofing system, for highways with asphalt overlay and railroads without protection board. Over 75 million square feet and 5,000 bridges have been protected worldwide, installed and operating in every climatic condition. Very high performance anti-skid systems and polymer concrete overlays are also offered. |
|
BOOTH #608 Contact: Dominique Tetreault Structal-Bridges is the largest steel bridge manufacturer in Canada and a key player in the United-States. It specializes in the design, fabrication and erection of bridges as well as Goodco Z-Tech structural bearings and expansion joints for the highway, railway and forestry industries. With an annual production capacity of 60,000 tons, Structal-Bridges is recognized for the high quality of its products and the reliability of its service. |
Structural Integrity Systems, LLCBOOTH #604Contact: Monica Svaty Structural Integrity Systems, LLC (SIS) provides patented electronic wireless sensor solutions for In-situ bridge evaluation. SIS has the ability to provide NBIS reports and complete bridge engineering solutions for rehabilitation at a significant cost savings. |
|
BOOTH #406 Contact: Tom Melillo STV offers a broad array of planning, design, construction management and inspection services for bridges, including rail, highway, fixed, movable, long-span and viaduct structures. Our bridge specialists have played key roles on bridge repair, widening and replacement projects throughout America. They’ve performed bridge inspections and inventories, condition assessments, seismic analyses and retrofitting, corrosion control, soils and foundation analyses, constructability assessments and resident engineering and inspection services for all types of crossings. |
|
BOOTH #827 Contact: Warren Brown D. S. TechStar, Inc. designs, manufactures and sells a variety of engineered products for bridges. Over the past twenty years, TechStar has supplied modular expansion joints, pot bearings, disc bearings, shock transmission units and parallel wire cable to bridges around the world. With manufacturing bases in several continents, TechStar can supply the bridge community with quality products meeting any design specification. |
Termarust TechnologiesBOOTH #601Contact: Wayne Senick Termarust Technologies manufactures cost effective, high performance anti-corrosive coatings for steel/metal structures. The Termarust® (HR CSA) High Ratio Co-Polymerized Calcium Sulfonate system stops the corrosion process specifically in crevice corroded and pack rust joints and connections and is ideal for flexible steel structures like bridges, towers, cables, high mast light poles, etc. |
|
BOOTH # 425 Contact: Dean Hooks Thermion Inc. has been inventing, designing and manufacturing Metalizing or Twin Wire Arc Spray systems for high production corrosion control since they were established in 1978. Through our combined experience of 60 years and commitment we have reached the highest standards while challenging the industry thus making our equipment a standard here in the US as well as being used all over the world. |
Traffic Control Services, LLC – Flagger Force BOOTH #416 Contact: Mike Doner |
Transpo Industries Inc.BOOTH #508Contact: John B. Karlson Transpo manufactures Polymer Concrete(PC) for repairing and preserving concrete structures and crack sealer/healers(HMWM) for sealing cracked concrete. Thin (1/8 -1/2”) PC overlay systems for concrete, steel and FRP bridge decks. Precast PC barrier panels available in Jersey and F shapes, flat single slope and custom designs for bridge railing stay-in-place forms. |
TRCBOOTH #512 Contact: Terry Maechler TRC provides engineering services in support of the transportation
and bridge industries with proven excellence in federal, state and
local agency projects. Another service TRC provides is the selling,
supporting and maintenance of multiple engineering design and analysis
programs. |
Trinity Highway Products, Inc. BOOTH #615 Contact: Gwendolyn Samuels Trinity Highway Products, LLC is the leading manufacturer of highway guardrail, highway guardrail end treatments, temporary and permanent crash cushions, truck-mounted attenuators and cable barrier. Trinity is the market leader in booth innovation and safety standards. |
|
BOOTH #423 & 522 Contact: Jean-Pierre (JP) Petiot Modular Steel Bridges, Permanent or Temporary for General Traffic either Road or Rail, Mining Applicationsand Maritime Applications for RO-RO Terminals. |
|
BOOTH #426 & 428 Contact: Chuck Anzaldi UNISTRUT® Fall Protection offers engineered horizontal and vertical fall arrest systems that are chosen specifically to fit each application. Our staff of engineers will design the safest and most economical solution for even the most difficult projects. We take responsibility for all phases of each job. Our permanent certification of acceptance assures the most competent system design and installation, We have the experience and resources to provide a turn-key solution for any situation. Our free online notification service, will aid in keeping your system in compliance with OSHA/ANSI requirements by providing timely, automatic e-mail notification of your certification expiration date. |
|
BOOTH #803 Contact: Steve Raleigh Unitex creates and manufactures products for the repair and protection of concrete bridges. We have developed systems for: bridge deck overlays, epoxy machine grouting, low modulus epoxy repair mortars, injection epoxies, and NSF - certified and Green - Spec listed products. Unitex also provides onsite technical support and product application training. |
University of Kentucky-Kentucky Transportation Center Booth # 407 Contact: Dr. Ted Grossardt The UK Transportation Center specializes in Structured Public Involvement in large bridge design. We design and deploy efficient, effective large groups processes that accurately measure the public's aesthetic preferences across a broad envelope of potential bridge types, using cutting edge feedback and decision support technologies. Come to our booth and text in your preferences during the conference. |
Vector Corrosion TechnologiesBOOTH #900Contact: Rachel Stiffler Vector Corrosion Technologies provides award winning products and services for concrete corrosion protection. Our innovative solutions include: chloride extraction, ICCP, and an array of galvanic protection systems (embedded galvanic anodes, galvanic jackets and activated arc spray zinc metallizing). Vector also provides corrosion evaluation and mitigation of post-tension corrosion. |
Viathor, Inc.BOOTH #816Contact: Clark Verkler Viathor, Inc. is dedicated to the development of top quality, user friendly, bridge design and analysis software. VBent, is a fully interactive substructure design tool for pier caps, columns and footings in integral (monolithic) and non-integral piers. Recent enhancements include flexure and shear reinforcement design, prestressed bent caps, and integral outriggers and drop caps. VBent can read PAPIER input files, and has been approved and accepted for use by PennDOT. VBridge is a superstructure design program for reinforced, or cast-in-place post-tensioned, concrete bridges. VBridge can compute live load for any bridge configuration and support type (integral and non-integral piers). VBridge analyzes 3D bridge models, and creates VBent input files by sharing geometry and load information. |
Viewpoint Construction Software BOOTH #337 Contact: Christa Morrow It’s becoming clear that today’s edge in the Heavy/Highway Contracting space has evolved from the technology available in this ever-changing information age. Senior managers and newer professionals are looking for contemporary solutions to common project and job issues. We know that road construction and maintenance presents a unique set of problems and complexities. With over 30 years of experience collaborating with Heavy/Highway Contractors, Viewpoint Construction Software has a bold perspective on what makes their jobs easier. Our in-depth understanding of road construction heritage and technological possibilities gives Viewpoint the ability to deliver powerful solutions for any mid to large sized Heavy/Highway Contractor. |
|
BOOTH # 303 & 305 Contact: Jim Layton Wacker Neuson is a global manufacturer of light and compact construction equipment. |
|
BOOTH # 924 Contact: Mark F. Goodwin Watermark Navigation Systems offers a complete line of bridge lighting products including self contained solar recharged systems. Watermark also carries marine navigation aids from buoys, marine lanterns and day marks to floating barriers and mooring systems. |
Westfall Company, Inc.BOOTH #913Contact: Garland R. Westfall Fiberglass drain systems and other corrosion resistant products
for elevated highways, bridge approaches and bridges. Come see new
solutions for age-old problems. Website: www.westfallcompany.com/bridgedrain.htlm. |
Wheeling
Corrugating Company
|
Whitman, Requardt & Associates, LLP BOOTH #434 Contact: Eric Meyer Est. in 1915, WR&A is a multi-disciplinary engineering, architectural, and planning firm providing planning, design, and construction management services for public and private sector clients. Headquartered in Maryland with offices in Delaware, Pennsylvania, Texas, and Virginia, WR&A has been recognized as a Top 175 Design Firm by Engineering News Record. |
|
BOOTH #727 Contact: Ryan Willliams Williams Form Engineering Corporation has been offering high capacity Ground Anchors, Concrete Anchors, Post Tensioning Systems, and Concrete Forming Hardware to the construction industry for over 80 years. |
|
BOOTH #801 Contact: Richard Humiston WireCo WorldGroup, the largest wire rope manufacturer in North America, leads in the production of structural bridge rope and strand. Our reputation for quality and service is unmatched. Each aspect of our engineering, manufacturing and fabrication process is monitored and controlled to assure the highest quality. |
Wirerope
Works, Inc.
|
|
BOOTH #325 Contact: Jerrod Bloz Z+F is one of the leading companies in the world in the field of high speed 3D laser measurement and a pioneer of the "STAND ALONE" 3D laser scanner. |
|
BOOTH #808 Contact: John H. Busch The Shanghai Zhenhua Port Machinery Company, ZPMC, is one of the world’s largest and most respected crane manufacturer and steel fabricator. ZPMC has established itself as a world class fabricator on large scale projects such as the San Francisco Oakland Bay Bridge, the Incheon Bridge and the Donghai Bridge. |
This page was last modified:
